How Bangor University students increase their understanding of sedimentation with Nortek
Students from the School of Ocean Sciences at Bangor University, UK, have a 30-year tradition of heading to the Laugharne estuary in south Wales each summer to investigate the sediment dynamics of this energetic environment. Nortek’s innovative Doppler instrumentation is now helping the students to understand the processes behind the sedimentation, while gaining valuable skills for future employment.
Survey data, collected by successive generations of students over this period, indicate that the estuary is infilling with fine marine sand at a rate of 1–2 cm per year.
The sediment transport results primarily from strong asymmetric tidal currents causing the influx of sand from Carmarthen Bay on the dominant flood tide.
Additionally, locally generated wind waves in the shallow estuary may contribute at different frequencies and complicate the overall picture. A newly introduced exercise utilizing Nortek’s Doppler instrumentation is helping the students to understand the processes behind this long-term trend in sedimentation.
“We are utilizing a Nortek Vector Doppler velocimeter, together with an externally mounted optical backscatter sensor (OBS) and a pressure transducer (PT) to illustrate the temporal patterns of sediment flux to the students,” says Dr Martin Austin, lecturer in coastal sediment dynamics at Bangor University.
Taking advantage of self-contained nature of the Vector Bangor University’s study group deploys the Vector at the start of the trip and sets it to operate in burst mode, recording 10 minutes of data at 4 Hz every 15 minutes. With its extended battery capacity and large on-board memory, the Vector can easily operate in this mode for the 10-day duration of the field trip.
“The self-contained nature of the Vector and its ability to log external analogue sensors means that it is perfect for this task,” Dr Austin adds.
To enable the students to compute the near-bed suspended sediment flux, Bangor University’s team position the sensor head of the Vector together with an optical backscatter sensor around 20 cm above the bed, while a pressure transducer flush positioned on the bed records even in the very shallowest water depths. All the data are logged internally by the Vector during its burst operations.
“Each day, a small group of students service the Vector, checking sensor alignments, clearing any weed deposits and downloading ‘their’ data from the previous 24-hour period, whilst at the same time learning about the Doppler principles and valuable skills, such as how to deploy instruments in the field,” Dr Austin explains.
Back in the laboratory, students write MATLAB code to analyze their data and compute the suspended sediment flux during the field course.
Increased scientific understanding of sediment transport What is the benefit of combining hands-on field learning and academic studies in this way? Dr Austin feels that having utilized the latest Doppler instruments from Nortek during their field studies, Ocean Science students at Bangor are finishing their degrees with an increased scientific understanding of sediment transport processes.
“The students acquire important skills to undertake field deployments and conduct analysis of numerical datasets, thereby giving themselves a great advantage when moving into employment,” he reports.
The figure shows the changing water depth, flow velocity and suspended sediment concentration as the semi-diurnal tide floods and ebbs in the estuary; flow velocities are noted to be strongest during the very shallow water depths at the start of the flood tide and end of the ebb tide. In the lower panel, the suspended sediment flux is shown to be direct up-estuary during the flood tide and seaward during the ebb; the sum of the flux over the entire semi-diurnal tidal cycle (and all of the tidal cycles) determines the net direction of transport.
An unmanned aerial vehicle (UAV) takes off from the rippled sandy bed in the estuary, and as it climbs you can see the instrument frame with the Nortek Vector in the lower-left corner. The Vector is positioned on a wide inter-tidal sandbank and you can see the main channel of the estuary in the center of the image.
The UAV then flies towards the instrument frame, providing a great overview of the deployment and also the varied nature of the seabed with ripples and bedforms of different dimensions.
The UAV then climbs to altitude, showing the vast expanse of sandbanks exposed at low tide and the open sea of Carmarthen Bay in the distance.
Instruments in use
Vector - 300 m
Sample 3D velocity at up to 64 Hz for small-scale research in coastal areas