Oceanography
AWAC 600 kHz
300 m, Generation 2Real-time current profiles and directional waves for intermediate water
- Real-time current profiles to 50 m range; real-time waves to 60m range
- Acoustic surface tracking (AST) with vertical beam
- Can be used both with fixed frames and subsurface buoys
Overview
The AWAC 600 kHz ADCP has become the standard reference technology in submerged wave-measurement applications. Thousands of these ADCPs have been deployed to capture the full wave spectrum in combination with current profiles. With a 60 m maximum range for wave measurements, 2 Hz sampling of the surface elevation and onboard wave processing for real-time applications, the AWAC 600 kHz is the optimal tool for medium water-depth current and wave measurements.
The AWAC 2 design offers future-proof electronics, better performance and easier instrument maintenance.
See the details of the Generation 2 AWAC updates in the release notes here.
-
Currents
-
Waves
Highlights
-
Real-time current profiles to 50 m range; real-time waves to 60m range
-
Acoustic surface tracking (AST) with vertical beam
-
Can be used both with fixed frames and subsurface buoys
-
Onboard wave processing for real-time applications
Usage
-
Online, real-time measurements of currents and waves
-
Design data for planning of new coastal structures
-
Site studies for offshore wind platforms
-
Monitoring of transient waves for channel wall protection
-
Studies of tidal currents
Setup
Designed for straightforward and reliable current and wave measurements in up to 50m of water, the AWAC 600kHz is configured using Nortek deployment software before installation. The AWAC is often considered the industry standard in wave measurements.
Deployment
AWACs are often bottom-mounted and/or implemented as part of real-time wave monitoring systems. Leading industry partners offer bespoke frames and buoys for the AWAC, Multiple communication protocols make simultaneous power and data transmission easy.
Data
Optional onboard wave processing allows real-time streaming of wave parameters to users onshore. Nortek’s SUV processing method (exclusive to AWACs and Signatures) enables quality wave measurements from a moving subsurface buoy. Nortek postprocessing software and/or display software is available for review or visualization of data, after deployment or in real time.
No technical specifications matched your search.
No technical documents matched your search.
No configurations matched your search.
No software matched your search.
Battery, 19 V - 1800 Wh, lithium
An optional high-capacity lithium battery for Signature & Generation 2 AWAC instruments.
Double aluminum battery canister w/cable to Signature / Gen 2 AWAC, 2-pin Inline
Double aluminum battery canister w/cable to Signature / Gen 2 AWAC, 8-pin Inline
Single aluminum battery canister w/cable to Signature / Gen 2 AWAC, 2-pin Inline
Single aluminum battery canister w/cable for Signature / Gen 2 AWAC, 8-pin Inline
Cable, 10 m Ethernet cable with 6-pin
Cable, 10 m serial cable with 8-pin w/RS485 trigger
Battery, 27 V - 540 Wh, alkaline
The standard battery for Signature & Generation 2 AWAC instruments.
Battery pack, 5-pack, 27 V - 540 Wh, alkaline
The standard battery for Signature & Generation 2 AWAC instruments.
Battery pack, 10-pack, 27 V - 540 Wh, alkaline
The standard battery for Signature & Generation 2 AWAC instruments.
Cable, 5m Ethernet cable with 6-pin
Compare similar products
Support resources
Request a quote
Found the right product? Fill out the form to request a quote.