User Story

WHOI study of tidal flats deploys Nortek current measurement sensors

Researchers from Woods Hole Oceanographic Institution (WHOI) carried out field observations on the tidal flats of Skagit Bay in Puget Sound, using a deployment that included Nortek Vectors and Aquadopp Profilers to measure currents.

The study was part of a project funded by the Office of Naval Research to investigate morphological evolution of tidal flats with large tidal ranges and significant fine-grained sediment input. The WHOI group was one of several institutions working concurrently on the Skagit tidal flats, each focused on different aspects of the complex system.

This particular field deployment was designed to study tidal trapping of fine-grained sediment by the baroclinic pressure gradient between the Skagit River outflow and the saltier Skagit Bay. The sediment trapping process is similar to that for turbidity maxima found in many deeper estuaries, but on the tidal flats the process is complicated by variability between 5 m of water at high tide and exposed tidal flats at low tide. Sediment deposition in the convergence zone could alter local bed morphology, but the process probably depends on river discharge, sediment supply and tidal amplitude.

Instruments were deployed for a month during summer to measure near-bottom currents, turbulence, salinity, temperature and suspended sediment. Strong horizontal and vertical gradients in density and suspended sediment required sampling at high frequency and vertical resolution.

Ideal for shallow water column

Cabled and fixed-head Nortek Vectors provided high-frequency velocity observations used to link turbulence levels to the stratification and resuspension of sediment. The small velocity cells and low-profile design of the Aquadopp Profilers were ideal for measuring the velocity structure over the shallow water column.  

Read the latest news on Nortek product innovation and exciting features.


Relevant products


  • VELOCIMETER

    Vector - 300 m

    Sample 3D velocity at up to 64 Hz for small-scale research in coastal areas
  • VELOCIMETER

    Vector - 4000 m

    Investigate 3D velocity in the bottom boundary layer down to depths of 4000 m
  • CURRENT PROFILER

    Aquadopp Profiler 600 kHz

    Up to 40 m current profiling range; easy to operate and deploy
  • CURRENT PROFILER

    Aquadopp Profiler 1 MHz

    Small and compact, with up to 25 m current profiling range; option for PUV wave measurements
  • CURRENT PROFILER

    Aquadopp Profiler 400 kHz

    Up to 90 m current profiling range; ideal for mean current measurements
  • CURRENT PROFILER

    Aquadopp Profiler 2 MHz

    Small and compact, short-range current profiling; option for PUV wave measurements
Shopping cart
Total
$0.00
Shopping Cart